3W CCFL lamp details and specifications
A powerful 3 WATT Compact Cold cathode Fluorescent lamp suitable for many lighting applications using a 12v DC power supply. Ideal for areas requiring power efficient lighting such as: Remote Workshops, Marine and 'off grid' Solar powered homes, Caravans and remote locations such as Farm buildings, Barns and Stables and portable camping lamps. Lamps are available in 'ES / E27' Edison Screw & 'B22' Bayonet cap base fitting.

SAFETY 1ST... Please ensure the correct rating of cabling is used throughout when installing DC circuits. Long cable runs may require high grade, high amperage cables in order to prevent excessive voltage loss, especially when using multiple lamps on the same circuit. All circuits should be fitted with a suitably rated safety fuse in order to prevent fire in the event of short circuit. Use of proprietary lamp fittings is recommended wherever possible to protect and prevent the ingress of insects and damp where lamps may be exposed in external / exterior light fittings.

Note: 12v 'AC' transformers or any kind of transformer which does not produce pure DC power must not be used. If using a DC regulated transformer, please ensure that it has enough power reserve for your application. For any remote application, we recommend the use of Lead Acid or other quality rechargeable batteries and / or using a solar 'PV' panel & regulator to replenish power as necessary

Fitting notes:

1) Using BC / B22 light fittings - If lamp does not illuminate, lamp may need removing, turning 180 degrees and re-fitting as they are polarity sensitive.

2) ES / E27 - Centre contact is + positive

N.B: All lamps are reverse polarity protected so that there will be no damage if polarity is incorect for your light fitting (if lamp does not illuminate remove and refit B22 or change over supply cables on E27 fittings